Lap Table
I bought a
very cheap cushion and photo frame, you also need an unpicker, needle and
thread and maybe a dob of glue
In the first
step you need to unpick one seam on the cushion (as this one didn’t have a
zipper!!)
Empty the
stuffing from the cushion
Now take the
back off the photo frame
And remove
the glass. I didn’t use the glass as I was afraid it might break down the
track. You could use it or replace it with Perspex if you wanted to.
I placed the
heavy cardboard photo frame backing into the empty cushion
Now line the
frame backing (inside the cushion) and the front of the frame (on the outside of
the cushion) to the centre.
Poke the
photo frames little lugs through the material of the cushion
If the
material is thick you might need to cut a slight slit with the unpicker
Now fold the
little lugs over onto the frame backing board so it’s firmly in place
I blobbed a
dab of glue over the lugs so the material will less likely tear
Once the
glue was dry I restuffed it
Now all that
needs to be done is to resew it up!!
DONE
How useful
will this be now, all for only $7!!
No comments:
Post a Comment